ECO-HOLMAT

Casei Eco-System's ECO-FARM Logo

ECO-FARM

Flooring and wall coverings for stables and equestrian facilities.

Drainage mats for natural soils

Perforated, Drainage-Type Paving for Paddocks

ECO-HOLMAT is a hollow-core slab made of recycled rubber , designed to be embedded in sand or soil to stabilize the walking surface. For specific needs, it can also be laid directly on top of wet or muddy areas, provided the subgrade remains stable.

A horse grazing on an ECO-HOLMAT honeycomb surface integrated into the pasture.

Integrated into the ground

The slab is set into the sand or soil to provide continuity with the walking surface.

Open Structure

The cells allow water to pass through to the soil and can support grass growth.

Optional Stabilization Kit

Mesh under the panels, stakes for anchoring, and straps to secure the edges.

01 / Product

A slab that blends into the ground

ECO-HOLMAT was designed to reinforce the walking surface in paddocks, access paths, and trails on natural terrain. The installation process involves embedding the slab into the soil or sand until it is flush with the surrounding surface.

Top surface of the ECO-HOLMAT panel with visible cells.
Top Surface
Underside of the ECO-HOLMAT slab with protrusions for ground adhesion.
Bottom Surface

Honeycomb Structure

How Water and Vegetation Pass Through

The through-holes allow water to drain to the ground and, on the lawn, let the grass grow through the slab. The protrusions on the underside increase traction on the ground.

The result depends on the permeability and condition of the soil. Assess the subsoil before working on areas with persistent waterlogging.

02 / Gallery

ECO-HOLMAT in Equestrian Environments

Three examples of use. For installation, refer to the instructions in the dedicated section.

03 / Applications

Where to Stabilize the Walking Surface

Start with the areas where horses put the most stress on the ground, such as access points and pathways between areas.

Paddocks and Access Points

To reinforce areas of soil or sand subject to repeated foot traffic, especially near entrances.

Hallways and Outdoor Pathways

To create a more even surface along the paths connecting the stables, paddocks, and work areas.

Outdoor Areas on Lawns

To integrate the slabs into the natural surface, allowing vegetation to grow through the holes.

04 / Product Specifications

Dimensions and Features of ECO-HOLMAT

Each slab covers 1.5 m². For areas subject to the most stress, you may want to consider a configuration with a stabilizing kit.

Size1000 × 1500 mm
Thickness22 mm
Weight12 kg per sheet (approx. 8 kg/m²)
StructurePerforated drainage panel
ColorBlack (uncolored)
Recycled material97% recycled rubber by weight
DimensionsPlate with optional stabilizing kit
Full view of the ECO-HOLMAT black hollow-core panel.
ECO-HOLMAT Black Hollow-Core Panel

05 / Material

Recycled rubber and flexible structure

The slab contains 97% recycled rubber by weight. The remaining 3% is a binding resin. The slab’s flexibility helps it conform to slight irregularities in the prepared ground.

06 / Installation and Stabilization Kit

How to Install ECO-HOLMAT and When to Use the Kit

Prepare a level subbase. Remove stones, roots, and other obstacles, leveling and compacting where necessary. The stability of the subbase is important in both configurations.

Standard installation, integrated into the ground

Place the slabs in the sand or prepared soil and level the edges with the surrounding ground. This configuration is designed to reinforce the walking surface.

Support as Needed

For specific needs—for example, after rain—you can place the slabs in the most heavily trafficked wet or muddy areas, provided the ground is still stable. When using multiple slabs, place them side by side and connect them to each other. This method complements integrated installation.

When to Prepare the Subbase

If the ground is soft or saturated, or if water is pooling, prepare the subbase before installation. Make sure the slabs lie flat and that the edges do not lift.

Cable tie, stake, and stabilizing net from the ECO-HOLMAT kit.

Optional accessory

Netting, stakes, and ties

The stabilizing mesh is laid on the ground beneath the slabs. The stakes are used to secure the installation, and the clamps connect the edges of the slabs. The kit helps keep the entire structure stable.

The stabilization kit is available as an optional accessory.

07 / Documentation

Documents for Your Project

To request product documentation, please specify the intended use, the type of ground, and the area to be covered.

Technical data for the
panel are available upon request to evaluate the product.


Installation Instructions: Request information regarding the intended substrate and application.

08 / FAQ

Frequently Asked Questions About ECO-HOLMAT for Paddocks

How to choose between integrated installation, spot-by-spot installation, and a stabilizing kit.

What is the recommended installation method for ECO-HOLMAT?

The installation plan calls for placing the slab in sand or prepared soil, blending it with the surrounding ground to stabilize the walking surface.

Can I place the slabs where mud forms?

Yes, for temporary use on damp or muddy areas, provided the ground is still stable. If you’re using multiple slabs, place them side by side and connect them. If the ground is saturated or unstable, you’ll need to reinforce the subgrade.

What’s included in the stabilization kit?

The kit is optional and includes a stabilizing net, stakes, and straps.

Can grass grow through the paving slabs?

Yes. The cells are open and allow vegetation to grow through the paving under the right conditions.

Does the slab solve the problem of standing water?

The cells allow water to pass through into the ground. Drainage depends on the permeability and condition of the subsoil.

ECO-HOLMAT Images

09 / Contact Us

Information for Your Equestrian Project

Describe the area to be stabilized and how it is used. We’ll help you assess the ground conditions and the installation configuration.

Useful Information

  • Approximate area and intended use
  • Soil type and conditions after rain
  • Most-Visited Areas and Anchoring Requirements

ECO-HOLMAT for playgrounds