ECO-KARGRIP ROLL
ECO-KARGRIP
Non-slip mats made of recycled rubber for load securing.
Non-slip roll for load securing
Non-slip roll made of recycled rubber for load securing
ECO-KARGRIP ROLL is a non-slip roll made of recycled rubber, designed to increase friction between the load and the supporting surface and help ensure the stability of goods during transport, handling, and storage.
The continuous format is particularly well-suited for large load beds and loading areas, where it creates a wide non-slip zone while minimizing discontinuities. ECO-KARGRIP ROLL enhances the effectiveness of straps, chains, bars, and other securing devices without replacing them.
1250 mm
Standard roll width.
3–10 mm
Eight thicknesses available.
μ = 0.75
. Coefficient documented for ROLL.
Approximately 90%
recycled material by weight.
30%
Maximum deformation limit according to VDI 2700, Sheet 15.
01 / Product
Continuous coverage for large loading areas
The ROLL format is designed for applications where it is useful to cover a large area with continuous anti-slip material.
The standard width of 1,250 mm and the availability of different thicknesses allow you to choose the configuration that best suits your operational needs. The roll can also be cut to size to adapt the anti-slip surface to the load configuration.
Compared to the use of individual elements, the continuous format allows for the creation of large support surfaces and provides flexibility in handling loads, pallets, and components of different sizes.
Extended Coverage
The roll format is suitable for load beds, platforms, and other loading surfaces where a large, continuous anti-slip area is required.
Different Formats
Eight standard thicknesses, ranging from 3 to 10 mm, are available in various roll lengths to accommodate different application configurations.
Cut to size
The material can be trimmed to size during use, making it easier to prepare the surface according to the actual dimensions of the load.
02 / Applications
Where to Use ECO-KARGRIP ROLL
ECO-KARGRIP ROLL is designed to increase friction and help ensure load stability during transport, handling, and storage operations.
Trucks and Semi-Trailers
Load beds of trucks, trailers, and semi-trailers, and other large loading areas.
Containers and swap bodies
Surfaces used for support during transport, handling, and storage.
Railroad Cars
Loading surfaces where it is necessary to increase the friction between the cargo and the supporting surface.
Pallets and Industrial Components
As a support surface under pallets, crates, machinery, and industrial components, or—when the configuration requires it—between loading surfaces in contact with each other.
The choice of format, thickness, and overall fastening system must always be evaluated based on the load, the contact surfaces, and the operating conditions.
03 / Specifications
Available sizes
ECO-KARGRIP ROLL is supplied in a standard width of 1,250 mm. The roll length varies depending on the thickness.
| Thickness | Roll Length | Width | Area per roll |
|---|---|---|---|
| 3 mm | 20 m | 1.25 m | 25 m² |
| 4 mm | 16 m | 1.25 m | 20 m² |
| 5 mm | 12 m | 1.25 m | 15 m² |
| 6 mm | 10 m | 1.25 m | 12.5 m² |
| 7 mm | 9 m | 1.25 m | 11.3 m² |
| 8 mm | 8 m | 1.25 m | 10 m² |
| 9 mm | 7 m | 1.25 m | 8.8 m² |
| 10 mm | 6 m | 1.25 m | 7.5 m² |
Supply
Rolls for Various Operating Configurations
The combination of thickness and length allows you to select the size best suited to the surface to be covered. The product is generally supplied in rolls and can be cut to fit the actual configuration of the load.
04 / Materials
Recycled rubber and a dotted surface
ECO-KARGRIP is composed of SBR rubber granules derived primarily from end-of-life tyres (ELTs), with possible minor amounts of recycled rubber from other sources, bound together with polyurethane resin and with the addition of EPDM granules.
Composition and Finish
Approximately 90% recycled material by weight
The recycled content is approximately 90% by weight.
The color is black, with no added pigments, and features a speckled surface created using colored EPDM granules. Additional speckles or slight aesthetic variations may result from the nature of the recycled material and the manufacturing process and do not compromise the product’s functionality.
The surface has a selected, uniform, and non-directional grain size distribution.
05 / Performance and Use
Friction and compressive strength for load securing
ECO-KARGRIP ROLL has a documented coefficient of friction of μ = 0.75, determined in accordance with the applicable criteria of VDI 2700.
The value μ = 0.75 listed in the TDS was determined under the specific test configuration indicated in the technical document; the actual coefficient may vary depending on the surfaces in contact and the operating conditions. The actual coefficient of friction depends on the contacting surfaces, environmental conditions, the cleanliness of the materials, and the overall load configuration.
ECO-KARGRIP ROLL must therefore be used as an anti-slip element within a properly sized load securing system. It does not replace straps, chains, bars, or other securing devices.
Compressive strength at 30%
Compressive strength is determined in accordance with ISO 3386-2 and evaluated according to VDI 2700 Sheet 15, which specifies a maximum deformation limit of 30% of the thickness. The TDS lists the following conservative values for the tested thicknesses.
| Tested Thickness | Conservative estimate based on a 30% reduction |
|---|---|
| 3 mm | 250 t/m² |
| 6 mm | 235 t/m² |
| 8 mm | 190 t/m² |
Friction
μ = 0.75
Documented value for the ROLL format based on the criteria of VDI 2700.
Temperature
−40 / +110 °C
Documented range of the material’s temperature resistance.
Contact Information
Clean and dry
Water, ice, oils, greases, and other contaminants can reduce the coefficient of friction.
Instructions for Proper Use
ECO-KARGRIP ROLL must be positioned at the actual contact points of the load.
Before use, make sure that the material and contact surfaces are clean, dry, and free of dust, oil, grease, ice, or other substances that could reduce the coefficient of friction.
The product is temperature-resistant from −40 °C to +110 °C. This specification refers to the material’s resistance and does not eliminate the need to verify the actual conditions of the contact surfaces and the fastening system.
When sizing the overall system, the following factors must be taken into account: the type of cargo, the weight distribution, the support surfaces, the anchoring devices, and the expected operating conditions.
06 / Documentation
Technical Data, VDI 2700, and REACH
When sizing and using the product, you must evaluate the overall load securing system and refer to the most recent technical documentation.
Contact us to request the available documentation and determine the most suitable configuration based on the load, contact surfaces, thickness, and operating conditions.
VDI 2700
Slip resistance is evaluated based on the criteria applicable to the materials used for load securing.
REACH (EC) No. 1907/2006
The product is classified as an article; the REACH Declaration of Conformity is available upon request.
Technical Documentation: Specific tests and physical properties are detailed in the technical data sheet and supporting documentation.
07 / FAQ
Frequently Asked Questions About ECO-KARGRIP ROLL
Quick answers to help you evaluate the size, application, and conditions of use for the anti-slip roll.
Does ECO-KARGRIP ROLL replace belts or other fastening systems?
No. The anti-slip mat increases friction between the surfaces in contact and enhances the effectiveness of the load securing system, but it does not replace straps, chains, bars, or other load-securing devices.
What thicknesses are available?
ECO-KARGRIP ROLL is available in thicknesses ranging from 3 to 10 mm. Each thickness corresponds to a specific roll length, while maintaining a standard width of 1,250 mm.
Can the roll be cut to size?
Yes. The ROLL format can be cut to fit the anti-slip surface to the actual dimensions and configuration of the load.
What is the coefficient of friction for ECO-KARGRIP ROLL?
The ECO-KARGRIP catalog specifies a coefficient of μ = 0.75 for the ROLL format, determined in accordance with the criteria of VDI 2700. The actual value depends on the contacting surfaces and operating conditions.
What compressive strength values are documented?
The TDS lists conservative values at 30% compression: 250 t/m² for 3 mm, 235 t/m² for 6 mm, and 190 t/m² for 8 mm. The test refers to ISO 3386-2 and VDI 2700 Sheet 15, with a maximum deformation limit of 30% of the thickness. No values are provided for other thicknesses.
Can it be used at low or high temperatures?
The material is temperature-resistant from −40 °C to +110 °C. However, the contact surfaces must be suitable, clean, and dry: water, ice, oils, greases, or other contaminants can alter the friction conditions.
What is it made of?
ECO-KARGRIP is made from SBR rubber granules derived primarily from end-of-life tyres, bound with polyurethane resin and mixed with EPDM granules. The recycled material content is approximately 90% by weight.
Technical and Commercial Inquiry
Request a quote for ECO-KARGRIP ROLL
To determine the most suitable configuration, please provide us with the type and distribution of the load, the support surface, the dimensions to be covered, the operating conditions, and the quantity required.
We can assist you in selecting the appropriate thickness and provide the technical documentation needed to evaluate ECO-KARGRIP ROLL as part of your load securing system.