ECO-SHOOT
ECO-BULLET
Ballistic and eco-friendly accessories for shooting ranges.
Ball-Containment System
Recycled rubber bullet trap block for ballistic walls and shooting ranges
ECO-SHOOT is a prefabricated element made of recycled SBR rubber, developed as a modular component for bullet containment and arrestation systems. The modules can be joined together and stacked to create configurations with different shapes and thicknesses, depending on design and operational requirements.
The mass and resilience of the elastic matrix promote deceleration and controlled penetration of the projectile into the material, helping to reduce the ricochet and fragmentation typical of rigid surfaces.
Modular
Modular and stackable pieces.
Verified Behavior
Ballistic tests documented in practical applications and conducted by qualified third parties.
500 × 300 × 200 mm
Nominal dimensions of a single module.
27 kg
Approximate nominal weight.
3 colors
: Documented color variations.
Recycled SBR
Elastic component of the module.
01 / Product
An elastic module for modular bullet trap systems
We manufacture ECO-SHOOT by agglomerating recycled SBR rubber granules—derived primarily from end-of-life tyres (ELTs)—bound with polyurethane resin. The result is a compact, elastic material designed for use in modular bullet containment and arrestation systems.
The modular design allows elements to be placed side by side and stacked, enabling the system’s geometry and thickness to be tailored to the specific project. ECO-SHOOT can therefore be used for both new installations and configurations designed to retrofit existing systems.
Modular Structure
Can be placed side-by-side and stacked
The overall system configuration is determined based on actual operating conditions and design requirements.
02 / Applications
Where to Use ECO-SHOOT
ECO-SHOOT is designed for ballistic applications that require a modular bullet-proof containment system.
Modular bulletproof walls
Modular Configurations
For constructing walls made up of elements placed side by side and on top of one another.
Containment and Arrest Systems
Modular component
As a modular component within configurations designed to interact with the impact of a projectile.
End-of-line protection
End of line
For configurations designed to protect the end zones of the playing fields.
New Installations and Upgrades
Configurable
The modular design allows the system to be configured for both new projects and the retrofitting of existing installations.
03 / Ballistic Behavior
Controlled penetration into the elastic matrix
The compact and elastic structure of ECO-SHOOT allows the material to interact with the impact, promoting the deceleration and penetration of the projectile into the module. This behavior helps limit the ricochet and fragmentation associated with impacts against rigid surfaces.
The performance of ECO-SHOOT has been the subject of documented ballistic tests, conducted both in-field and by qualified third parties. To assess the suitability of the configuration for specific conditions of use, the relevant test reports must be consulted, and the geometry, thickness, and design requirements must be taken into account.
The images of the product in use and of the recovered material visually document the interaction between the projectile and the product’s elastic matrix, showing both the surface of the wall after use and the behavior of the material in the impacted area.
Wall after use
Visual inspection of the affected surface
The front view shows the condition of the ECO-SHOOT wall after use, displaying the working surface of the system installed in a bullet-proof configuration.
Surface Detail
Affected Area and Material Weave
This close-up view highlights the surface structure of the module in the area affected by the impacts.
Recycled material
Interaction Between a Projectile and an Elastic Matrix
The photographic documentation of the recovered material visually illustrates the performance of the recycled SBR rubber in the affected area.
The images serve to describe and document the system’s behavior after use. The performance evaluation must always be based on the configuration used and the corresponding test reports.
04 / Composition and Colors
Recycled SBR rubber bound with polyurethane resin
ECO-SHOOT is made from SBR rubber granules derived primarily from end-of-life tyres (ELTs) and bonded together with polyurethane resin. In the colored versions, the appropriate colorant paste is added.
Documented Colors
Black, Red, and Green
Black — uncolored version.
Red — pigmented version.
Green — pigmented version.
05 / Installation
Modular configurations that can be arranged side-by-side and stacked
ECO-SHOOT is designed to be installed by placing individual modules side by side and on top of one another. The catalog specifies that the modules should be stacked on a flat surface.
Project Configuration
Dimensions and thickness to be determined
The dimensions and overall thickness must be determined based on design and operational requirements. The product data sheet is not a substitute for the designer’s or user’s assessment of the actual conditions of use.
06 / Documentation
Technical Data, Compliance, and Testing
The technical documentation for ECO-SHOOT includes product information, compliance details, and test results. For evaluations related to a specific ballistic configuration, please refer to the relevant test reports.
REACH Regulation (EC) No. 1907/2006
ECO-SHOOT is classified as an article under the REACH Regulation and does not require a Safety Data Sheet.
EN 71-3:2019
The product complies with the standard regarding the migration of substances, based on tests conducted at an accredited laboratory.
Ballistic Testing The product’s performance is supported by documented ballistic testing. Test reports and additional technical documentation are available for evaluating specific applications.
07 / FAQ
ECO-SHOOT Technical FAQs
Direct answers to questions about key product specifications and system configuration.
What is ECO-SHOOT?
ECO-SHOOT is a prefabricated bullet trap block made from recycled SBR rubber, designed as a component of modular bullet containment and stopping systems.
How is a bulletproof wall built using ECO-SHOOT?
The modules are designed to be placed side by side and stacked. The geometry and thickness of the configuration must be determined based on design requirements and actual conditions of use.
Has ECO-SHOOT undergone ballistic testing?
Yes. The product’s performance has been the subject of documented ballistic testing, including tests conducted by qualified third parties. For data specific to particular configurations or test conditions, please refer to the relevant reports.
Does ECO-SHOOT completely eliminate ricochets and fragmentation?
The technical documentation describes behavior that helps reduce bounce and fragmentation compared to rigid surfaces. The actual behavior must be evaluated based on the specific configuration and conditions of use.
What documentation is available?
The product technical data sheet is available, as well as documentation regarding ballistic testing and REACH compliance, as needed. The TDS also indicates compliance with EN 71-3:2019+A1:2021.
Technical Request
Request technical information about ECO-SHOOT
Please contact us to request the technical documentation for ECO-SHOOT and to discuss the system configuration in relation to the planned installation, the required geometry, and the project’s operating conditions.