ECO-HOLMAT
ECO-FUN
Paving and equipment for playgrounds and recreational areas.
Honeycomb anti-trauma flooring
ECO-HOLMAT: Playground safety surfacing with shock-absorbing interlocking elements for playgrounds
ECO-HOLMAT is an interlocking rubber paving system designed for playgrounds and outdoor recreational areas. The structure absorbs impacts, provides a slip-resistant surface, and promotes water drainage, while also adapting to uneven or sloped natural terrain. The open design also allows grass to grow through the surfacing, integrating the playground safety surfacing with the ground. ECO-HOLMAT is tested to EN 1177.
Format
1,000 × 1,500 mm
Thickness
22 mm
CFH on grass
2.72 m
1000 × 1500 mm
Sheet size.
22 mm
Thickness.
12 kg
Approximate weight per sheet.
Black
. Available color.
01 / Product
Playground safety surfacing that blends in with the ground
ECO-HOLMAT is designed for areas prone to accidental falls, combining impact absorption, a slip-resistant surface, and a drainage system. Its honeycomb structure allows it to be used on natural surfaces such as soil and grass, even on uneven or sloped terrain, and enables grass to grow through the paving.
Honeycomb Structure
Honeycomb structure and traction
The open structure promotes drainage. The underside is equipped with cylindrical feet, designed to increase traction with the subfloor.
02 / Gallery
Design and Details of ECO-HOLMAT
The images show the honeycomb structure of the slab and the configuration of the underside, which is designed to come into contact with the subgrade.
Drainage side
Detail of the alveolar surface
Close-up of the underside
03 / Applications
ECO-HOLMAT for playgrounds and outdoor areas
ECO-HOLMAT is designed for playgrounds and outdoor recreational areas. It can be installed on natural surfaces such as dirt and grass, even on slopes, and can also be used on artificial surfaces or for temporary installations.
Playgrounds
For areas where playground safety surfacing is required.
Earth and Grass
For installation on natural ground using the specified installation method.
Uneven or Sloped Surfaces
The structure can also accommodate natural surfaces that are not perfectly flat.
Temporary Installations
For temporary use or on artificial surfaces, the slabs can be laid and joined together.
04 / Product Information
ECO-HOLMAT Dimensions and Specifications
This table lists the key data needed to select and install flooring.
| Format | Thickness | Sheet Weight | Approximate weight | Color |
|---|---|---|---|---|
| 1,000 × 1,500 mm | 22 mm | 12 kg | 8 kg/m² | Black |
Structure: honeycomb and drainage-friendly.
Bottom: equipped with cylindrical feet.
05 / Impact Protection
Critical fall height (CFH) of 2.72 m on grass
The ECO-FUN catalog states that ECO-HOLMAT is backed by a test and validation report certifying a critical fall height (CFH) of 2.72 m, determined with the product installed on grass as the subgrade.
CFH
2.72 m
Value determined using ECO-HOLMAT installed on a lawn.
UNI EN 1177
ECO-HOLMAT has been tested to EN 1177 for use as a safety surface in playgrounds.
Installation Configuration
The CFH value applies to the configuration being tested; to achieve the expected performance, you must follow the specified installation procedure and use the recommended installation accessories.
06 / Installation
Installation of ECO-HOLMAT on Natural Ground
For installation on soil or grass, the subbase must be prepared by removing rocks, roots, and uneven areas and leveling the surface. After preparing the subgrade, the stabilizing mesh is laid; the ECO-HOLMAT slabs are then laid on top of the mesh, anchored to the ground with stakes, and connected to one another with plastic ties.
Installation System
Netting, stakes, and cable ties
For permanent installation on natural ground, a stabilizing mesh, stakes for anchoring to the ground, and clamps for connecting the slabs are provided.
Substrate Preparation
Remove rocks, roots, and uneven areas to create a level surface.
Stabilizing Net
Place the mesh so that it is in direct contact with the prepared substrate.
Stakes and cable ties
Anchor the slabs to the ground and connect their edges to one another.
For temporary use or on artificial surfaces, the catalog recommends simply laying the slabs side by side, connected to one another.
07 / FAQ
FAQs About ECO-HOLMAT
Quick Answers for Designers, Installers, Retailers, and Playground Operators.
What is ECO-HOLMAT?
ECO-HOLMAT is playground safety surfacing in the form of honeycomb-structured rubber panels designed for playgrounds and outdoor recreational areas.
What are the dimensions of ECO-HOLMAT?
The slab measures 1000 × 1500 mm, is 22 mm thick, and weighs approximately 12 kg, which is equal to 8 kg/m².
What is the critical fall height for ECO-HOLMAT?
The catalog lists a CFH of 2.72 m, determined using ECO-HOLMAT installed on grass as the subgrade.
Has ECO-HOLMAT been tested to EN 1177?
Yes. ECO-HOLMAT is tested to EN 1177 for use as a safety surface in play areas.
Can ECO-HOLMAT be installed on a lawn?
Yes. ECO-HOLMAT is also designed for natural surfaces such as soil and grass and allows grass to grow through its honeycomb structure.
Can it be installed on a sloped lot?
Yes. The catalog specifies that it can also be used on natural, sloped terrain.
What accessories are included for installation?
For installation on natural ground , a stabilizing net, stakes, and fastening straps are provided.
Can ECO-HOLMAT be used temporarily?
Yes. For temporary use or on artificial surfaces, the catalog specifies that the slabs should simply be laid side by side, connected to one another.
Technical and Commercial Inquiry
Request information about ECO-HOLMAT
Contact us to determine which ECO-HOLMAT configuration is best suited for your planned playground or recreational area.