ECO-KARGRIP MAT

ANTI-SLIP MATS FOR SECURING THE LOAD

Table of Contents

Catalog

See the catalog for more information and discover all the products in this family

You don’t always need to cover the entire flatbed-sometimes it’s enough to reinforce stability at specific support points.
ECO-KARGRIP MAT s are compact non-slip mats made by cutting rolls from recycled rubber (sourced primarily from ELTs), ideal for placing under coils, beams, hoses or under intermediate supports.
Their compactness and versatility make them perfect for targeted applications where you need to increase friction only where it’s really needed.

Compliant with Directive 2014/47/EU and tested according to VDI 2700, they ensure safety, durability and environmental sustainability.

Features

When there is a need to stabilize the load at specific points, ECO-KARGRIP MATs are the most practical and effective solution.
The possibility of making them to measure in various sizes and thicknesses makes them suitable for all point applications, i.e., situations in which the load rests on only a few points of support: coils, beams, pipes or delicate elements that require more friction and protection.

  • Purposeful use → increase friction exactly at the bearing points, preventing slipping and rolling.

  • Customized size → available in square or rectangular sizes and in thicknesses from 3 to 10 mm, adaptable to any need.

  • Tear and wear resistance → designed to last even with heavy use.

  • Durability → they maintain non-slip properties even after numerous uses.

  • Environmentally sustainable material → recycled rubber from ELT with EPDM granule speckled surface.

  • Certified coefficient of friction → up to 0.75 μ, higher than the minimum standard required by VDI 2700.

Technical Specifications

ECO-KARGRIP MAT mats are cut from rolls and can be made in rectangular or square format, with different sizes and thicknesses.
This flexibility allows them to be adapted to all point applications, i.e., at the points where the load contacts the floor or intermediate supports.

FEATURESVALUE
Length (mm)On request (≥ 50 mm)
Width (mm)On request (≥ 50 mm)
Thickness (mm)3, 4, 5, 6, 7, 8, 9, 10

Colors

ECO-KARGRIP MATs are made in black color, with dotted surface obtained by the addition of EPDM granules.

Optional packaging

ECO-KARGRIP MATs can be supplied in bundles compacted with shrink film for convenient and orderly packaging.
This type of packaging allows a defined number of pieces to be grouped into ready-to-use sales units, facilitating both handling and commercial distribution.

FAQ – Frequently Asked Questions

  • When is it appropriate to use MATs instead of Rolls or Strips?
    MATs are ideal for point applications, such as under coils, beams, pipes, or elements that rest on only a few points. Compared to Rolls and Strips, they are more practical when you need to increase friction only in localized areas.

  • Can they be tailor-made?
    Yes. The mats are cut from rolls and can be produced in various sizes and thicknesses, in square or rectangular format, so as to fit every need.

  • Are they reusable?
    Absolutely yes. ECO-KARGRIP MAT is designed for multiple uses and retains non-slip properties even after numerous operating cycles.

Read our Privacy Management Policy